Zirconia Grinding Balls Size Check
Grinding Media

Zirconia Grinding Balls, Laboratory Low-Contamination Grade

Laboratory-grade zirconia grinding balls for planetary and roller mills: 94.6% ZrO2, density ≥6.03 g/cm³, Mohs 9, sphericity ≥98%. No metallic contamination for analytical, pharmaceutical and research samples. Sizes from 0.1 mm, 25 kg drums.

Specifications

ZrO2 Content
94.6%
Stabilizer
Y2O3 (5.4% with others)
True Density
≥6.03 g/cm³
Bulk Density
≥3.76 g/cm³
Mohs Hardness
9
Vickers Hardness
≥1210
Fracture Toughness
9 MPa·m1/2
Grain Size
≤0.3 µm
Sphericity
≥98%
Sizes
From 0.1 mm up (jar-matched sizes for lab mills)
Sintering Temperature
≥1500 °C
Packaging
25 kg plastic drum; 800–1000 kg per pallet

Media that does not become part of your sample

In a research or quality-control lab, the grinding step is supposed to prepare the sample, not change it. Yet every lab that runs steel or low-grade ceramic media has met the same problem: the analysis comes back with elements that were never in the material, or a pharmaceutical and biological sample picks up contamination that invalidates the run. The batch was small, the work was careful, and the media quietly wrote itself into the results. These laboratory-grade zirconia grinding balls are made to stay out of your data. They are yttria-stabilized zirconia (Y-TZP) with 94.6% ZrO2, no metallic content to shed, and chemical stability against strong acids, alkalis and solvents. What you grind is what you analyse.

Matched to laboratory mills and jars

Laboratory work runs on planetary and roller mills with jars from tens of millilitres to a few litres, and the media has to fit that scale. Sizes start at 0.1 mm for fine work and run up through the standard jar sizes, with sphericity of at least 98% so the charge rolls evenly in small jars instead of locking and sliding. High density matters even more at lab scale. At a true density of at least 6.03 g/cm³, zirconia balls deliver strong impact energy in short runs, so small samples reach fineness quickly — useful when the sample is precious, the queue for the mill is long, or the material is heat-sensitive and cannot sit in a jar for hours.

Hardness that keeps results repeatable

A lab media charge is expected to serve for months of short runs, and its condition decides whether last month's method still gives this month's numbers. At Mohs hardness 9, Vickers hardness of at least 1210 and fracture toughness of 9 MPa·m1/2, these balls resist the chipping and abrasive wear that change a charge's size distribution over time. The fine grain structure, 0.3 µm or below, wears evenly, so the charge you validated is the charge you are still using. That stability is also why the same grade serves analytical and biotechnology work, pharmaceutical development, cosmetics and food-related research, and university and institute laboratories: the contamination question is answered by the material itself, not by a cleaning procedure you have to defend.

Wet, dry, and in between

The balls run in wet and dry milling, and pair with zirconia, alumina, agate and stainless jars. For contamination-critical work, a zirconia jar with zirconia balls keeps the whole grinding system in one chemically stable material. For routine sample preparation, the same balls drop into your existing jars and simply remove the media from your list of variables.

Tell us your jar and your sample

Send us your mill model, jar size and material, and the sample you are preparing. We will recommend a ball size and charge weight for your jar, so the media arrives matched to your equipment instead of guessed from a catalogue. Standard packaging is 25 kg plastic drums; smaller laboratory quantities can be discussed for trial work.

Continue browsing

More products from the range

Pair it with other media or mills from the same range.

Zirconia Grinding Balls
Grinding Media

Zirconia Grinding Balls, 95% ZrO2 High Density

Yttria-stabilized zirconia grinding balls with 94.6% ZrO2, true density ≥6.03 g/cm³, Mohs hardness 9 and sphericity ≥98%. Built for low-contamination wet and dry milling of battery materials, electronic ceramics, coatings and fine powders. Sizes from 0.1 mm, packed in 25 kg drums.

View product